South America Area Suitable Silver Sandblasting Anodized Aluminum
Introduction of Extrusion:
1: Extrusion principle of aluminum profile
Extrusion is a kind of plastic processing method that applies
external force to the metal blank placed in the container
(extrusion cylinder) to make it flow out of the specific die hole
to obtain the required cross-section shape and size.
2: Structure of aluminum extrusion press
The extruder is composed of base, front column frame, tension
column, extrusion cylinder and hydraulic system under electrical
control. It is also equipped with die base, thimble, scale plate,
sliding plate, etc.
3: Classification of aluminum extrusion methods
According to the type of metal in the extrusion cylinder,
stress-strain state, extrusion direction, lubrication state,
extrusion temperature, extrusion speed, type or structure of tool
and die, shape or number of blank, shape or number of products, it
can be divided into forward extrusion method, reverse extrusion
method (including plane deformation extrusion, axisymmetric
deformation extrusion, general three-dimensional deformation
extrusion) and lateral extrusion method, Glass lubrication
extrusion, hydrostatic extrusion, continuous extrusion and so on.
4: Forward hot deformation aluminum extrusion
The vast majority of hot deformation aluminum production
enterprises adopt the forward hot deformation extrusion method to
obtain the aluminum with the required cross-section shape through
specific dies (flat die, cone die, split die). This is the only
aluminum production method adopted by jinhaochun aluminum so far!
The forward extrusion process is simple, the equipment requirements
are not high, the metal deformation ability is high, the production
range is wide, the aluminum performance is controllable, the
production flexibility is large, and the tooling is easy to
maintain and correct.
|Description||South America Area Suitable Silver Sandblasting Anodized Aluminum
Extrusion Profiles 6063 T5 Alloy|
|Material Thickness(t)||t=0.8-2.0 mm|
|Materiral||Aluminum Alloy 6063|
|Color||Champagne, Silver White ,Bronze, Grey, Black, (RAL series)etc.|
|Surface Treatment||electrophoresis, anodized, wood grain, polished and etc|
|Shape||Break Bridge,T Shape,Square, Round, Flat, Oval, and according to
|Length||Normal length=6m or in customer's order|
|Usage||Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc.|
1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles
Introduction of Electrophoresis:
Aluminum or aluminum alloy products are used as anodes in
electrolyte solution, and the process of forming aluminum oxide
film on the surface of the aluminum and aluminum alloy is called
anodic oxidation treatment of aluminum and aluminum alloy. After
anodization, the surface of aluminum can produce several microns -
hundreds of microns of oxide film. Compared with the natural oxide
film of aluminum alloy, its corrosion resistance, wear resistance
and decoration have been obviously improved and improved.
- The aluminum oxide film is a porous membrane. Whether it is
coloured or not, it must be closed before being put into use, so as
to improve its corrosion resistance and weatherability. There are
three kinds of treatment methods, namely, high temperature
hydration reaction closed, inorganic salt closure and organic
(1) High temperature water sealing.
This method utilizes the hydration reaction of aluminum oxide film
and water to turn the amorphous membrane into a hydrated
The hydration reaction can be carried out at both normal and high
temperatures, but at high temperatures, especially at the boiling
point, the hydrated crystalline membrane is a very stable and
irreversible crystalline film. Therefore, the most commonly used
aluminum oxide film is treated by boiling water or steam treatment.
(2) Sealing of inorganic salts.
Inorganic salt method can improve the fastness of organic coloring
dyes, so it is often used in chemical coloring.
(3) Organic sealing method.
This is the soaking, soaking or coating of the aluminum oxide film.
Because of the high cost and the increase of the process flow, it
is not easy to use, more or more of the two kinds of methods
mentioned above, and the first kind of high temperature hydration
is the mainstream.
|Implement National Standard||GB/5237.2-2008|
|Ingot State||Nonferrous mental industrial standard YS67-93|
|Chemical Of Oxide Film||GB/T3190-96|
|Class Of Oxide Film||AA10 , AA15 ,AA20|
|Surface Type||Matte ,Flat|
|Colors||Silver , White ,Bronze , Champagne|
|Advantage/Features||Corrosion-Resistant , Durable , Shining And Decorative|
Please tell us the information below, and we will give the best
suggestion to you !
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
3. Which color you want or tell us the architectural style you
4. Purchase quantity. It will convenient us to give you the best