Aluminum Led Heat Sink Aluminum Extrusion Heat Sink Profile T6 T5
|Description||Led Heat Sink Aluminum Profile|
|Material Thickness(t)||1.0/1.1/1.2/1.4 mm|
|Materiral||aluminum alloy 6063,6063A,6060,6061|
|Color||White ,Green, Grey, Black, (RAL series)etc.|
|Surface Treatment||anodized, powder coated, electrophoresis, wood grain, polished and
|Shape||Square, Round, Flat, Oval, and according to customer's drawing.|
|Length||Normal length=6m or in customer's order|
|Usage||Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc.|
1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles
Heat Insulating Introduction:
The main body of the thermal insulation aluminum alloy is aluminum
material, and the plastic section cavity is used in the middle
section of the section make the heat breaking material. This
innovative structural design takes into account the advantages of
two materials, namely plastic and aluminum alloy, and meets various
requirements of decorative effect, door and window strength and
The three seal structure of the doors and windows can be realized
by the insulated and broken bridge aluminum profile, the water
vapor cavity is separated reasonably, the isostatic balance of gas
and water is successfully realized, and the water tightness and
tightness of the doors and windows are greatly improved. The air
tightness of the insulated aluminum door and window is better than
any aluminum and plastic window. It can ensure the dust free in the
windowsill and floor in the area with large wind sand. It can
guarantee the residents of 50 meters on both sides of the highway
not to be disturbed by noise; and the thermal conductivity is 40 to
70% lower than that of the non insulated aluminum alloy profile and
|Implements National Standard||GB5237.6-2012|
|Surface texture||Anodizing, electrolytic coated, powder coating, PCDF coating and
|Longitudinal anti-shearing value||>=24N/mm|
|Features||With both heat insulation system,the products are environment
protected,and with corresponding,the value can be <=207W/M2.K|
1.Good heat preservation: PA66 nylon in broken bridge aluminum has
low thermal conductivity.
2.Sound insulation is good: the structure is carefully designed,
the joints are tight, and the test results are 30 db, which is in
accordance with relevant factors.
3.Impact resistance: because the outer surface of broken bridge
aluminum alloy is aluminum alloy, it is more resistant to impact
than plastic steel window profile.
4.Good air tightness: there are many sealant strips at each slot of
the broken bridge aluminum window, which has good tightness.
5.Water tightness is good: doors and windows are designed with
rainproof structure and completely isolated from the rain.
6.Good fire resistance: aluminum alloy is metal material, and it
does not burn.
7.Good anti-theft: broken bridge type aluminum alloy windows,
equipped with fine hardware accessories and advanced decorative
locks, make thieves helpless.
8.Maintenance free: broken bridge type aluminum alloy window
section is not susceptible to acid and alkali erosion, will not
turn yellow, fade, almost no need to maintain.
Welcome to visit our company ! Choose us & contact us!